Rapid Prototyping Company in the Bay Area
Working prototypes in weeks, not quarters. A rapid prototyping company in the Bay Area with engineers behind the machines: looks-like models, works-like boards and EVT builds, printed and machined on our own Silicon Valley bench, with a senior engineer reviewing every part before it is made.
A rapid prototyping company in the Bay Area that is not a print bureau
Search for rapid prototyping companies and you find two kinds. Print bureaus and machine shops make whatever file you upload and will not tell you that the snap fit will crack or the board will not clear the lid. Product development firms will tell you, after a discovery phase and a deck. inteRFace R&D is the third kind: a senior engineering team based in Silicon Valley that prints and machines in-house, designs the electronics and firmware too, and reviews every part before it is made. We serve the whole Bay Area and ship nationwide.
A prototype is the cheapest way to be wrong - and the only way to be confidently right. The discipline is choosing the cheapest prototype that answers the question you are actually asking: a 3D-printed shell for ergonomics and a pitch, a functional PCB assembly for electrical and firmware validation, a bench-built mechanical assembly for a fit and tolerance study, an interactive mock-up for user research. We pick the question first and the process second.
What we prototype
Product prototyping is three builds that answer three different questions, usually in this order.
Looks-like models
The build that proves the product is the right shape: 3D-printed enclosures for ergonomic review, user tests, campaign photography and investor demos. FDM from our own printers settles board clearance, connector cutouts and button travel in a day; when the surface has to photograph well, the same CAD goes to a resin partner for a finish that reads as molded.
Works-like prototypes
The first time the product does its core job: a functional PCB assembly on the bench, firmware running, sensors reading, radio talking, battery under a real load. Rev A is usually module-based, so the architecture is proven before a custom board is committed, and a bench-built mechanical assembly checks fit and tolerance stack-ups while the electronics are still moving. Looks-like and works-like run in parallel, so visual and functional questions are answered in the same cycle.
EVT builds
The build that merges the two: a small batch, typically five to fifty units, that look and work like the production unit on a custom board in a near-final enclosure. EVT units go to pilot users, to environmental and abuse testing, and to an FCC or CE pre-scan while a fix is still cheap. What each build stage has to prove, and what skipping one costs, is in EVT vs DVT vs PVT: what each build actually proves.
How fast, and why
Concept to a working prototype runs in 2-4 week cycles, and a hardware product typically takes 2-4 cycles to lock its design. Each cycle is short, focused and measured: a test plan before the build, the build, a bring-up and validation report, and a decision about what the next revision changes. The speed comes from how the shop is set up, not from a promise to work harder:
- In-house printers and a CNC mean no queue: a fit-check part comes off the printer overnight, and the second revision is on the bench the same week.
- Electrical, firmware and mechanical under one roof: when the board grows a connector, the enclosure cutout moves the same day, not after an email thread between three vendors.
- Bay Area quick-turn board fabrication when the schedule is blocked on learning: bare boards in days rather than weeks, assembled on our bench for the first units.
The first revision is cheap and fast enough to be wrong in public; by the third, the design is usually stable enough for an EVT build and a production conversation. The same cadence applies to a board: schematic review, a quick-turn Rev A, bring-up, Rev B. To see how those cycles line up with EVT, DVT, PVT and certification for your own product, try the free hardware timeline planner.
In-house FDM and CNC, vetted SLA, SLS and MJF partners
We print FDM in-house in engineering thermoplastics (PLA, PETG, ABS and TPU) and machine on our own CNC for parts that need tighter tolerances, a sealing face, real heat resistance or true material properties. Resin (SLA), SLS and MJF nylon run through vetted partners, chosen with the same supplier-vetting discipline we apply on production programs. The process is picked by the part's job:
- FDM for fit checks, board clearance, brackets, jigs and fixtures: fast and cheap, holds a few tenths of a millimetre, visibly layered, weaker across the layer lines than along them.
- SLA resin for fine features, gasket grooves and surfaces that have to photograph well: tighter tolerances and a smooth finish, but standard resin is brittle and will lie to you about a snap fit.
- SLS or MJF nylon (PA12) for snap fits, living hinges and parts that must survive pilot users: near-isotropic strength and real engineering behaviour, a few days of lead time.
- CNC for aluminum and machined plastics: the real bulk material, the tightest tolerances, and the honest answer when a printed part cannot hold the load or the spec.
Rapid prototyping CNC services and 3D printing are two tools, not competitors; the engineer picks the one that answers the question. Have a part in CAD already? Drop the STL into the free 3D printing instant quote for dimensions, printability findings and a price band at 1 to 100 pieces, computed in your browser. Materials and the print-to-molding path are on the 3D printing service page; what a printed part can and cannot prove is in 3D printing hardware prototypes: when it works and when it lies to you.
An engineer reviews every part
This is the difference between a prototyping company and a print shop. Before a part hits a build plate or a spindle, a prototype engineer looks at what the part is for: wall thicknesses, print orientation against the load direction, tolerance stack-ups, bosses and inserts for the electronics, material behaviour over time. Before a board is ordered, the schematic and layout get the same treatment: test points a probe can reach, a power tree that survives real loads, connectors that match the enclosure.
- Looks-like and works-like prototypes built in parallel - so visual and functional questions are answered together
- Test plan written before the prototype is built, not after - every prototype answers a specific question
- Bring-up and validation report on every revision - bugs and learnings documented for the next rev
- DFM-aware from prototype 1 - the path to production is built into the design from day one
- Test-point and instrumentation discipline - debugging is engineered, not improvised
What you get
Every revision ships as a package, not a box of parts:
- The parts and assembled units, with the native CAD, STEP files and the print or machining files that made them.
- For electronics revisions: schematics, layout sources, Gerbers, drill and pick-and-place data, and a costed bill of materials.
- Firmware sources and the instructions to build and flash them.
- The test plan, the bring-up and validation report, and a written list of what the next revision changes and why.
- A straight answer about what the prototype has proved and what it has not, so the next spend is a decision rather than a hope.
You own all of it. We never hold design files, never take equity, and sign a mutual NDA before any technical detail is exchanged.
Across California
We are based in Silicon Valley and have no other office, but our prototyping work does not stop at the Bay Area. The engineering runs over shared CAD and video, and printed parts, machined parts and assembled boards ship from our bench, overnight to the major California metros. How an engagement runs from each region:
- Hardware prototyping in Los Angeles, for consumer product, aerospace and medical device teams across LA County. Design reviews run on video, and a day on site is planned only when it is worth the flight, and written into the quote.
- Hardware prototyping in San Diego, for wireless, IoT and medical device teams. First boards are assembled and powered on at our bench before they ship, and the first bring-up session is on video the day the box lands.
- Hardware prototyping in Orange County, for medical device and consumer product teams from Irvine to Anaheim. Every revision ships with its test plan and a bring-up and validation report, the kind of paper trail a regulated product will need later.
- Hardware prototyping in Sacramento, for agtech, cleantech and public-sector hardware in the Sacramento region. It is about a two-hour drive from our bench, so an in-person kickoff or bring-up day is practical when the design calls for one.
How rapid prototyping is priced
Our prototyping services are priced in engineering hours; you get a written quote with phases before any work starts. Parts are the cheap half; the engineering that makes a part worth printing, and the bring-up that turns a board into a working device, is where the hours go, so the quote lays out each phase and what it proves. For a planning number before the call, use the free project cost estimator for ranges by project shape; the stage-by-stage breakdown of where a prototyping budget goes is in How much does a prototype cost?. Founders planning the whole product should start with Hardware for Startups, which explains how a first engagement starts, with real hour counts from delivered work.
From prototype to production
Prototype is the halfway point. Because the same team does DFM, tooling, supplier vetting and the transfer to a contract manufacturer, the enclosure that printed fine at quantity ten is redesigned for molding before the volume forces it, and the board that worked on the bench gets its test fixture and panelization before the first production order. Bay Area product development and prototyping under one roof means no handoffs, so the prototype learnings survive into production.
Bring the sketch, the CAD, or the board that does not work yet. Book a free 30-minute call with a senior engineer at interfacernd.com/book: we will tell you which prototype answers your question first, and whether we are the right shop for it. Only have a part to print? The free 3D printing instant quote gives you a number tonight.
Frequently Asked Questions
How much does a rapid prototyping company in the Bay Area cost?
Parts are the cheap half. An FDM enclosure half is tens of dollars of material, a resin or nylon part from a bureau is usually tens to a couple of hundred dollars, and a machined aluminum prototype a few hundred. The cost is the engineering: CAD that is printable and moldable, electronics that bring up cleanly, firmware, and the testing. We price in engineering hours; you get a written quote with phases before any work starts. The free cost estimator at interfacernd.com/tools/cost-estimator gives a planning range in minutes.
How long does rapid prototyping take?
A looks-like shell is days: an FDM part overnight, a resin part from a partner in one to three business days, SLS or MJF nylon in three to five. A works-like prototype runs in 2-4 week cycles, and most products need 2-4 cycles to lock the design. An EVT build adds quick-turn board fabrication and assembly, so plan on a few weeks from a frozen design to units in hand. What slows a project is a change in the question, not the machines.
Is there rapid prototyping near me in the Bay Area?
If you are anywhere in the Bay Area, yes. We are based in Silicon Valley and serve the whole region, including San Jose, Palo Alto, San Francisco, Oakland and the East Bay, with local pickup and in-person design reviews available by arrangement. Parts and assembled units ship nationwide, and the engineering happens over shared CAD and video wherever you sit, so distance changes the shipping, not the cycle time.
CNC machining or 3D printing for a prototype?
Print when the question is fit, clearance, ergonomics or appearance, and when you expect to revise the part more than once; FDM and SLA are fast and cheap enough to be wrong. Machine when the part needs the real bulk material: a sealing face, a tight tolerance across the whole part, heat, stiffness, or a load a layered part will not hold. Many prototypes use both, a printed enclosure around a machined chassis. We run both in-house and pick per part, not per project.
Do you do the electronics and firmware too, or only the mechanical parts?
Both, and that is the point. A prototyping company that only prints shells leaves you to find a board designer, a firmware engineer and someone to make the three agree. Our team designs the schematic and PCB, writes the firmware from bare-metal to embedded Linux, builds the enclosure around the real board, and ships the companion app when the product needs one. One accountable team, one set of CAD, and a prototype that works end to end on demo day.
What do you need from us to start?
Whatever you have. A sketch and a paragraph is enough for a first call; CAD, a schematic, a dev-kit build or a competitor's product gets us further faster. We sign a mutual NDA before any technical detail is exchanged, then come back with the question your first prototype should answer, the process we would use, and a written quote with phases. Book the free 30-minute call at interfacernd.com/book, or send an STL through the instant quote tool if you only need a part made.
Ready to talk specifics?
A 30-minute call with a senior engineer beats three rounds of email. Tell us what you're building.